ARRI M40 HMI with 1000Hz High Speed Ballast is a location work horse. Whenever you need to punch light through a silk or bounce light off a reflective surface, an M40 is the ultimate answer. At the design stage, the interaction of lamp, reflector and converter lens was taken into consideration and computer simulated, resulting in unmatched performance. The M40 can be supplied with a 2,500 or 4,000W single-ended HMI lamp, making it a very versatile lighting fixture.

• ARRI M40 HMI Head + Barn Doors
• ARRI 1000Hz High Speed Ballast
• 25ft Header Cable
• Combo Stand

The M40 uses lensless MAX technology to combine the characteristics of a Fresnel and PAR source. With a focus range of 18 – 52°, normally only achieved with supplementary lenses, the M40 outperforms the brightness of its predecessor, the ARRISUN 40/25 by approximately 30% while throwing an even beam with sharp shadows. Innovations include CCL, which compensates for power loss when using long cables and Cross Cooling which separates the electronics from the lamp housing, thus ensuring greater longevity of the head and lamp.

Structurally, the M40 employs a robust, tubular steel yoke and disc brakes to safely lock down the head when tilting. The head weighs in 6.6 lb lighter than its predecessor due to intelligent design, while it’s still able to use all of the ARRISUN 40/25’s accessories. Don’t worry about moist locations either; the M40 has an IP23 weather-resistant rating.

ARRI EB MAX 2.5/4K 1000Hz High-Speed Electronic Ballast with AFL, CCL, DMX & AutoScan (US)
Designed for ARRI True Blue, M-Series, and Compact/Theater lamp heads, the EB MAX 2.5/4K High-Speed Electronic Ballast will safely power these fixtures while also providing numerous advanced performance features. It offers AutoScan for optimizing light quality, even when working at frequencies up to 1200 Hz. Other built-in features include an Active Line Filter and Compensation of Cable Losses, ensuring that light quality is consistent and the power supplied is appropriate, even over longer distances. DMX control from a console is provided as well, allowing for remote dimming from 50 to 100%, on/off controls, and the ability to adjust the operation mode and frequency. Additionally, the ballast has a low-frequency setting for minimizing noise and an array of LED status indicators for quickly viewing settings.

ARRI M40 HMI Light rental in Los Angeles, LA, Hollywood, Burbank and USA nationwide

ARRI M40 HMI Head + Barn Doors

ARRI 1000Hz High Speed Ballast

25ft Header Cable

Combo Stand